Product Description
a description:
Customize:
Origin: Mainland China
Product options: without cable, with cable (optional)
Product segment: CH340G
Operating voltage: 5V
Input voltage: recommended 7-12V, limited to 6-20V
Digital I/O Ports: 54 (15 provide PWM output)
Analog input pin: 16
Constant current of each I/O pin: 40MA
DC 3.3V: 50MA
Flash memory: 256 KB, of which 8 KB is used by the boot loader
RAM: 8 KB
EEPROM: 4KB
Clock speed: 16MHz
Size: about 101.2 x 53.3mm/3.98 x 2.09 inch (measured by hand)
Weight: 36.6g (measured manually)
How to use:
Connect the 2560 development board and the driver will be installed automatically
Select the MEGA2560 board in the template
Select the COM port, which can be checked on my computer. Now, the port is on your 2560 development board
First, locate the routine that came with the Ard and burn it
The Mega power supply system has two options: direct USB power supply or external power supply.
The power supply selection will be switched automatically. External power supply can choose from AC to DC adapter or battery. The limit voltage range of this control board is 6V~12V. However, if the supplied voltage is less than 6V, the I/O port may not be able to supply 5V, resulting in instability; If the supplied voltage is greater than 12V, the voltage regulator may overheat and potentially cause further damage to the MEGA. Therefore, the recommended operating power supply is 6.5-12V, and the recommended power supply is 7V or 12V.
NB:
Due to the different monitor and light effect, the actual color of the item might be slightly different from the color showed on the pictures. Thank you!
Please allow 1-2cm measuring deviation due to manual measurement
Reviews
There are no reviews yet.